Low water pressure? No water pressure? We've got your well pump repairs covered in Bracebridge, ON

At Harris Plumbing Inc., we have certified Well Technicians and Well Technician Helpers who can help you get water flowing to your cottage or rural property or increase water pressure in your home.

In a jiffy, we can repair and replace well-pump installations to get water running again. We have broad experience in repairing and replacing pump controllers, pressure tanks, pressure switches, submersible pumps and jet pumps.

We also have deep experience with water softeners and water filters to ensure you can enjoy your water.

Common well pump services include responding to:

1. Pressure tank failures and dysfunctions
2. Pump controller and pressure switch failures
3. Filtration and water treatment failures for well and lake water
4. Failures of water pumps, including jet pumps and submersible pumps
5. Clogs of foot valves
6. Failures of supply piping from lakes and wells to the home or cottage
7. Failures of check valves throughout the systems

The costs of a well pump repair

A well pump repair could range from a simple fix to an outright replacement of major components. Water Pump services could range from a few hundred to thousands of dollars. That's why it's critical to hire a trustworthy, licensed and certified plumber and well technician!

How your water pump system works

Typically, there is a water source, like a lake or a well from which water is drawn. Plumbing supply lines are installed to support either a submersible pump or jet pump to push water from the water source to your home.

Within the home, there is typically a pressure tank and pressure regulating system like a pressure switch, a pump controller, or a constant pressure system. These regulate water pressure, ensure pumps don't turn on every time water is used, and reduce wear on pumps.

Lastly, many water treatment systems may reside within your well system. Usually, a sediment filter removes particulate matter from your water source.

There may be more treatments based on your water quality. These include water softeners, iron or sulfur filters, and carbon filters. You might also need tannin filters, UV filters, or disinfection systems to remove pathogens.

For drinking water, Reverse Osmosis systems are an option. These systems are usually installed at a point-of-use, like a kitchen drinking water faucet.

Jet Pumps vs Submersible Pumps

When it comes to sourcing water for your home, cottage, or business in Central Ontario, Muskoka, Simcoe County, or York Region, the right pump is crucial. Harris Plumbing offers expert advice and installation for two primary types: jet pumps and submersible pumps. Both are designed to move water from a well to your property, but they operate differently and are suited to different well conditions. Understanding these differences is key to making an informed decision, and our experienced plumbers are here to guide you every step of the way.

Jet Pumps: Powerful Surface Performance

Jet pumps are non-submersible pumps, meaning they sit above ground. They use a combination of pressure and suction to draw water up from the well. A jet pump system includes the pump itself, plus a system of pipes and nozzles (the injector) that are located either on the pump (shallow well jet pump) or down in the well casing (deep well jet pump).

When Should You Choose a Jet Pump?

• Shallow Wells: Jet pumps are typically more suitable for wells with a water level of 25 feet or less. They are a cost-effective solution for these applications.
• Access: Servicing and maintaining jet pumps are easier because the pump is located above ground.
• Simpler Installation (for shallow wells): Shallow well jet pump installation is often less complex.

However, jet pumps can be less efficient than submersible pumps. This is especially in deeper well applications. They can also be noisier. Regardless they remain a reliable and economical choice.

Submersible Pumps: Efficient In-Well Power

Submersible pumps, as the name suggests, are designed to be installed *inside* the well casing, submerged in the water. These pumps push water to the surface, rather than pulling it, making them much more efficient, especially for deeper wells.

When Should You Choose a Submersible Pump?

• Deep Wells: Submersible pumps excel in wells with water levels greater than 25 feet. These are common in many areas of Muskoka and Central Ontario.
• High Efficiency: They are significantly more energy-efficient than jet pumps, leading to lower operating costs over time.
• Quiet Operation: Submerged pumps operate quietly!
• Reliability: Submersible pumps are reliable and require less frequent maintenance.

The installation cost of a submersible pump may be higher, but their efficiency and reliability make them a preferred choice. Those with deeper wells or those looking for a long-term, low-maintenance solution in areas like Muskoka should consider a submersible pump system.

Other considerations when repairing or installing well pump systems

• Well Depth Variations: We have the expertise to install the right pump for your well.
• Seasonal Water Level Changes: Seasonal variations can affect well water levels in our region. We can recommend pumps and installation techniques to ensure a reliable water supply year-round.
• Local Water Quality: We recommend pre-filtration or water treatment systems. They protect your pump investment and ensure the quality of your water.

We carry high quality pumps and reliable pumps

We specify professional-grade pumps for our clients. You need not worry whether you're getting a quality product from a quality manufacturer. Our pumps of choice are among the best value pumps consumers can have installed in their homes and cottages.

We are the best plumbers and well technicians for your needs near Bracebridge, ON

Our team understands that having reliable access to water is essential for your comfort and daily needs.

That's why:

1. We prioritize quick and efficient service to minimize any disruption to your routine. Whether you're facing a sudden loss of water pressure or a complete pump failure, we are just a call away.
2. Our well technicians are also licensed plumbers who can help repair and install all fixtures to plumbing code as well. They can advise on water treatments required for your water.
3. We have offered honesty, transparency, and peace of mind for over 51 years. We serve the Simcoe, Muskoka, and York regions with our well services and plumbing.
4. We have full liability insurance to protect your home. Our professional office staff is here to help with your service requests and other support needs.
5. We stand behind our work with a 1-year workmanship guarantee.
6. We're a locally owned, Canadian company based in Barrie!

At Harris Plumbing Inc., customer satisfaction is our top priority. We pride ourselves on our transparent pricing, professional service, and commitment to quality. Don't let well pump problems affect your life. Contact us today!